Salton JM1 Juicer User Manual


 
9
ASSEMBLY INSTRUCTIONS (Continued)
Step Four
Place the Juicer Cover on over
the Juice Bowl with the large pulp
ejection opening towards the back
of the Juicer. Swing the Clamps
upward as shown in the
illustration.
Step Five
Place the tops of the Clamps
on the respective slots on the
Juicer Cover, leaving the
Clamp Hinges resting out.
Press the bottom of the
Clamps in, until they snap
snugly into place.
Step Six
Place the Pulp Basket behind
the Juicer under the Pulp Spout
(located on the back of the
Juicer Cover) behind the Juicer.
®
®
®
USING THE JUICEMAN
®
JR.
TO TURN YOUR JUICEMAN® JR. ON:
Make sure that your Juicer is completely and properly assembled.
See ASSEMBLY INSTRUCTIONS.
Remove the Food Pusher from the Feed Tube.
Press the ON/OFF Switch up to the ON position.
Place produce into the Feed Tube and gently direct through the Feed Tube and
Blade Basket with the Food Pusher.
Tip: Try alternating types of produce to ensure maximum efficiency.
TO TURN YOUR JUICEMAN® JR. OFF:
Press the ON/OFF Switch down to the OFF position. Unplug the Juicer from the
outlet when not in use.
6