Salton JVPM1W Coffeemaker User Manual


 
9
9. Press the Power Light/Indicator Button to turn power on, then
simultaneously press the 5-Ounce Serving and 8-Ounce Serving
Buttons, see Figure 8.
The water from the Water Tank will cycle through the coffee maker.
NOTE: If unit goes unused for 3 or more days, please repeat
above process (steps 1-9).
CAUTION: Do not immerse cord, plug or machine in water or
other liquid.
Brewing Coffee
CAUTION: Before Brewing in your coffee maker for the first
time, complete the steps listed under “Before Using Your Pod
Coffee Maker” on pages 6-9 to ensure your machine functions
properly.
1. Fill the Water Tank with water up to the ‘MAX’ line. Never pour
other liquids such as milk or hot water into the Water Tank. A
full tank will yield about 7 5-oz. servings or 4 8-oz. servings of
coffee.
2. Press the Power Light/Indicator Button.The indicator light will
flash while the water heats up. Heating will take approximately
1
1/2 minutes.
3. To open the Lid, place one finger behind Lever and pull out.
Gently raise Lid to open position.
4. Place the Adjustable Brew Spout inside the coffee maker.
5. Place the empty Pod Holder inside the Pod Chamber, see
Figure 7.
FIGURE 8
JVPM1B-609 8/18/04 4:40 PM Page 9