Filter
Top Products
37
EN
Cleaning and Care (continued)
Steam cleaning
1
Remove all accessories from the oven.
2
Pour approximately 400 ml (3 / 4 pint) of water onto the bottom of the empty oven.
Use normal water only, no distilled water.
3
Close the oven door.
Caution The steam cleaning system can be switched on only when the oven
has cooled to room temperature completely. Allow the oven to cool
completely if it does not work.
4
Turn the Divider Select Knob to
steam clean mode.
5
After an amount of time, the heater
completes operating and its lamp
remains on.
6
When the operation is complete, the
display will blink and a beep indicates
the end.
7
Turn the Divider Select Knob to “Off”
to end the operation and clean the
interior.
BT65FQBPST_XSA-00161N_EN.indd 37 2008-09-11 11:49:45