Filter
Top Products
GB
13
Programming Air Filter Clean Time
When the air filter check indicator (FILTER) appears in the display
window after a certain time of use, you should clean the air filter
according to the instructions “Cleaning the Air Filter” on page 16 in
this booklet. Then follow the procedure as below if you want to change
the air filter clean time.
Controlling Beep Tone
You can select the beep tone you require. There are 4 sound levels
available.
1. Hold down PROGRAM LOCK( ) and then press
NUMBER 3 pad. Hold together for 2 seconds.
Result :
The display will show the length of time in
hours between cleaning the air filter you have
programmed in or the original time preset by
the manufacturer.
✉ Default clean time is 500 hours in terms of pure
oscillating time, not the continuity time.
2.
Press
NUMBER
pads to set the desired clean time.
✉ You can set up to 999 hours.
3.
Hold down
PROGRAM LOCK
( ) and then press
NUMBER 3
pad.
Hold together for 2 seconds in order to save the new
value.
This completes the programming of the air filter clean
time.
4.
Press
CANCEL
()
pad to return to cooking mode.
✉ .After the clean time has expired, you should
clean the air filter. See page 16.
Hold down
CANCEL
()
and then press
NUMBER 0
pad. Hold
together for 2 seconds.
Result : Beep tone is changed to one level higher than
current one.
✉ Beep tone 0 does not make beep sound.
Settings are circulating whenever you press the hidden
keys in the following order.
Snd 0
➞ Snd 1 ➞ Snd 2 ➞ Snd 3 ➞ Snd 0 (No sound)
✉ Default tone is Snd 2.
jtX`Y`X]Y`niUGGwGXZGGmSGtG\SGYWW[GGXWaY_Ght