Filter
Top Products
GB
14
Error Codes
Erroe Items Code Error Beep Cause Remedy
Power
frequency Error
(50/60Hz)
E1
- Power frequency is other than 50 Hz. Unplug the power cord plug and check if the power frequency is 50 Hz.
Plug the power cord in 50 Hz power source and see If “E1” appears. If the error code is
displayed again even after the correct power source is provided, contact the nearest
service centre.
HVT-I Power
Error
E41
One long beep
for 2 sec
The circuitry inside the oven is not working
correctly.
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E41” appears again. If the
symptom persists, contact the nearest service centre.
HVT-II Power
Error
E42
One long beep
for 2 sec
The circuitry inside the oven is not working
correctly.
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E42” appears again. If the
symptom persists, contact the nearest service centre.
EEPROM Error
E5
One long beep
for 2 sec
Memory IC (EEPROM IC) is not working
correctly.
In this case, other features except for
memory function work properly.
(You can operate the oven manually)
Press CANCEL pad one or more times and try to start a memory heating. If the error
code “E5” persists, contact your nearest service centre.
jtX`Y`X]Y`niUGGwGX[GGmSGtG\SGYWW[GGXWaY_Ght