Filter
Top Products
11
TWIST ICE MAKER
Making Ice Cubes
1 Remove the ice cube tray by pulling it towards you.
`
2 Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3 Slide the tray back into the holder, taking care not to spill the
water.
4 Wait until the ice cubes are formed.
Freezing time
: It is recommended that you wait for about one
hour with the temperature set to QUICK
FREEZING for the ice cubes to form.
Removing the Ice Cubes
1 Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
`
2 Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
Result
: The ice cubes fall into the storage bin.
3 Repeat Step 2 for the other half of the tray, if necessary.
4 Remove the storage bin by:
◆ Lifting it slightly
◆ Pulling it towards you
MOVABLE ICE TRAY
Making ice cubes
1 Remove the ice cube tray by pulling it towards you.
`
2 Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3 Place it under the freezer shelf or on the freezer shelf .
Removing the ice cubes
To remove ice cubes, hold the tray at its ends and twist gently.
EN
Making Ice Cubes (OPTION)
DA99-00478-EN 2004.3.3 2:39 PM 페이지11