Filter
Top Products
14
REPLACING THE INTERIOR LIGHT
Always unplug the appliance when replacing the refrigerator light. This eliminates the danger of
electric shock.
Freezer lamp
1. Remove the indoor lamp cover by using a driver, fit the
front part of indoor lamp cover into the groove and then fit
the rear part.
2. Turn the indoor lamp to remove and replace it with a new
one.
3. After fitting the front part of the indoor lamp cover, fit the
rear sill area and then re-fit the screw.
Fridge lamp
1. Insert driver into the front groove of the light cover.
Pull forward an then downwards. (After replacing the
light, insert the rear part first and then the front part by
fitting into groove.)
2. Turn the indoor lamp, remove it and replace it with a new
one.
❊ If you have difficulties in replacing and purchasing
parts, contact the nearest Samsung Electronics
Service Center.
Front
+
_
Front
DA99-00743A(TD-PJT) 3/18/04 4:12 PM Page 14