Filter
Top Products
10
FUCTIONS OF WATER DISPENSER(OPTION)
HOW TO USE WATER DISPENSER
Lift up and pull out the water tank.
• Hold the handgrips on both sides to lift out the
water tank.
• Clean the inside of water tank when using it for
the first time.
With the water dispenser, you can obtain chilled water easily without opening the
refrigerator door.
Fill the water tank with water, ensuring that it is in a stable position, allowing for
the extended water supply outlet.
• Fill with water up to 2.5
l
. If it is filled higher than this, it may overflow when the lid is
closed.
• It is impossible to fill the tank with water while it is positioned in the refrigerator.
Close the refrigerator door after fitting the
water tank.
• Confirm that the water spout is outside after
closing the door.
Method 1.
Fill the water lifting the round lid in the
arrow direction to open.
Method 2.
Please fill the water after holding and
lifting the large lid to open it.
Press down the water supply lever after placing a
cup on platform.
• Place the cup deep inside to touch the back wall.
• Check that the locking device is set to "open". Water
can only be dispensed on this setting.
• Throw away 2~3 cups of water when using the water
dispenser for the first time after installation.
• Approximately 1 0~1 5 cups of water are available.
Round lid
Water tank
Hand-grip
Water supply lever
Water spout
When the water dispenser is not in use.
After removing water tank, tightly insert the cap for sealing in
place of water spout, so that cool air escapes.
DA99-00743A(TD-PJT) 3/18/04 4:12 PM Page 10