Samsung DE68-02846A Microwave Oven User Manual


 
O
PERATION
12
O
PERATION
Adjusting the Volume
The Sound button on the microwave allows you to
adjust the volume of the microwave’s chime sound.
The sound is initially set to its highest setting. To
change the volume:
1 Press the Sound button. The display
shows
“0-OFF 1-LOW 2-MED 3-HIGH”
2 Press “0” to turn the volume off, “1” for
low volume, “2” for medium volume, or
“3” for high volume.
The display will show the volume you have
chosen, then shows “PRESS START”
3 Press Start :
The display returns to the time of day.
Using the Help system
Your microwave offers helpful instructions for
many procedures.
1 When you need feature information and
helpful hints, press the Ayuda(Help
Screen) button and then press the button
that you want to get information on. Help
information is available in 4 languages
(English, French, Spanish and
Portuguese). The “HELP” indicator
appears in the display while you are
using this feature.
Setting Cooking Times & Power Levels
Your microwave allows you to set up to three differ-
ent stages of cooking, each with its own time length
and power level. The power level lets you control the
heating intensity from Warm (1) to High (0).
One-stage Cooking
For simple one-stage cooking, you only need to set
a cooking time. The power level is automatically
set at High. If you want to set the power to any
other level, you must set it using the Power Level
button.
1 Use the number buttons to set a cooking
time. You can set a time from one second
to 99 minutes, 99 seconds. To set a time
over one minute, enter the seconds too.
For example, to set 20 minutes, enter 2, 0,
0, 0 .
2 If you want to set the power level to
something other than High, press the
Power Level button, then use the number
buttons to enter a power level.
Power Levels:
1 = warm 6 = simmer
2 = low 7 = medium high
3 = defrost 8 = reheat
4 = medium low 9 = sauté
5 = medium 0 = high
The display shows “PRESS START OR ENTER NEXT
STAGE COOKING TIME”
3 Press the Start button to begin cooking.
If you want to change the power level,
press Pause/Cancel before you press
Start, and re-enter all of the instructions.
GB-SRH1230_02846A 2003.10.13 9:40 AM Page 12