Filter
Top Products
cleaning and maintaining _21
Middle nozzle
1. Pull the upper rack towards the front and
remove it.
2. Check whether the nozzle holes are
clogged by food particles.
3. If cleaning is needed, remove the nozzle.
4. To remove the nozzle, unfasten and
remove the nut, and then remove the
nozzle.
5. Clean the nozzle, re-insert it, and fasten
the nut.
6. When fastening the nut, turn it firmly by
hand.
7. Check whether the nozzle is engaged
correctly by rotating it by hand.
Upper nozzle
1. Check whether the nozzle holes are
clogged by food particles.
2. If cleaning is needed, remove the
nozzle.
3. To remove the nozzle, pull out the
upper rack first, unfasten the nozzle
cap by turning it counterclockwise,
and then remove the upper nozzle.
4. Clean the nozzle, re-insert it, and
then fasten the nozzle cap to the
nozzle by turning the cap clockwise.
5. Check whether the nozzle is
engaged correctly by rotating it by hand.
STORING YOUR DISHWASHER
If you need to store your dishwasher for an extended period of time, first drain and disconnect it. If you
leave water in the hoses and internal components, you can damage the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
03 cleaning and maintaining
Cap nozzle
1
2
DMT400_DD68-00074A.indb 21 2010-07-09 �� 11:28:33