Filter
Top Products
maintaining your appliance _63
MAINTAINING YOUR APPLIANCE
Before a self-cleaning cycle
Remove the racks. Leaving the
oven racks in the oven during a
self-cleaning cycle will discolor the
oven racks and make them dicult
to slide in and out of position.
• Make sure the door lock feature is
turned o and the oven is cool. If
they are not, the self-cleaning cycle
will not start.
Do NOT use the surface burners
while the oven is operating in the self clean mode.
Before a self-cleaning, check whether the door is locked
• A blinking Lock icon indicates the oven door is in the
process of being locked.
• When the Lock icon is on, the oven door is locked.
• When Loc is shown in the display, it indicates the door
lock feature is on. Press and hold the START/SET pad
for 3 seconds to unlock the oven controls.
WARNING
140102_(IB)NX58F5300SS_AA_DG68-00509A-01_EN.indd 63 02/01/2014 13:49:07