Filter
Top Products
10
Operation
Selecting the Display Weight
You can choose between pounds(LBS) and kilograms(KG).
1. Press My Choice button and then press the 2 button.
The display shows: LBS OR KG PRESS MY CHOICE
2. Press My Choice button.
The display shows: LBS
3. Press the My Choice button repeatedly to select the weight
measurements you wish to use.
4. Press the Start button.
Setting the Remind End Signal
The Remind End Signal can be set On or Off.
1. Press the My Choice button and then press 3.
The display shows: REMIND END SIGNAL ON/OFF PRESS MY
CHOICE
2. Press the My Choice button to select ON.
The display shows: ON
3. Press the Start button. The display returns to the time of day. To
turn Remind End Signal off, repeat steps 1-3 above.
Setting the Clock AM/PM
1. Press the Clock button.
The display will show: SELECT AM/PM
2. To select AM or PM, press the Clock button.
3. Use the number buttons to enter the current time. You must press
at least three numbers to set the clock. For example, if the current
time is 5:00, enter 5,0,0.
The display will show: 500
4. Press Clock again. A colon will appear, indicating that the time is
set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by
pressing the Clock button.
Setting the Daylight Saving Time adjustment
1. Press the My Choice button and then 4.
The display will show: DAYLIGHT SAVING TIME ON/OFF PRESS
MY CHOICE
2. Press the My Choice button to select ON.
Press again to select OFF.
3. Press the Start button. Time of day will advance one hour. If OFF
is selected, time will go back one hour.
If the clock is set for standard time, this function allows convenient
time changes without needing to reset the clock. Daylight Saving
Time begins for most of the United States at 2 a.m. on the first
Sunday of April, and reverts to Standard time at 2 a.m. on the last
Sunday of October.
SMH7175_00356T.indb 10 2006-04-26 ｿﾀﾈﾄ 1:19:07