Filter
Top Products
INSTALLING THE APPLIANCE
Selecting the location for appliance.
• Install the appliance
SURSHUO\RQWKHÁDWDQG
ÀUPVXUIDFH
- Stand table option
model can not be
adjustable for the height
of appliance.
Install appliance in the available space.
• Allow 1 foot (30cm)
from the ceiling, and
2 inches (5 cm) from
the wall.
Install appliance in the appropriate location.
• Place the appliance
away from direct
sunlight or heat.
Do not install appliance in a damp place.
• There is a risk of
electric shock or
malfunctions.
6SHFLÀFDWLRQRIHOHFWULFSRZHU
7KHHOHFWULFSRZHUVSHFLÀFDWLRQ
of the appliance is
attached inside at the top
of the door or outside at
the back.
SAFETY WARNINGS
Do not use any extension cords or double
adaptors.
• Do not plug several
appliances into the same
multiple power board.
This could cause over
KHDWLQJDQGWKHULVNRIÀUH
Earthing the appliance.
• If the socket is the
2-legged type, the
appliance must be earthed.
• Do not connect the earthing
wire to the gas pipes or telephone lines.
Replacing the lamp.
1. Unplug the power cord from the socket.
2. Remove Tray partition and shelf.
3. Unscrew by plus-type driver then take
out lamp cover.(optional model only)
4. Turn the lamp counter clockwise.
5HSODFHZLWKQHZODPSVDPHVSHFLÀFDWLRQ
as original one.
SETTING UP THE REFRIGERATOR
Step 1
Clean up inside of the refrigerator with a
clean cloth.
Insert the power plug into the socket while
keeping the door open for checking the
interior light, then turn the temperature
control button to “MAX”.
Step 2
Close the door and let the refrigerator
operate for 2-3 hours.
Step 3
Check the refrigerator temperature by
touching inside the freezer.
Step 4
The appropriate temperature should
be controlled by turing the temperature
control button to “4”, or the desired
temperature can be adjustable. Now your
refrigerator is ready to work.
Step 5
Warning ! : Disconnect power supply before
replacing the lamp.
about 5cm
about 5cm
about 30cm