Filter
Top Products
54
TROUBLESHOOTING
1) For example, if you want to change freezer compartment standard temperature to -4(-2°C)
by operating option, do as below.
This function is for changing the standard temperature.
In -2(-19°C) of current temperature of freezer compartment, if you make the temperature
lower to -4(-2°C) by the option, the standard temperature would be controlled -6(-21°C)
Therefore, if you change the setting of temperature option to -2(-19°C) on the panel, the
appliance will be operated with -6(-21°C).
It means that standard temperature is controlled -4(-2°C) less than setting temperature in
the display.
If the display changes to option setting mode, all displays will be off except freezer and
fridge compartments temperature display as below.
(Fresh food and freezer compartments case will be explained only because all options are
operated with the same method according to the option table.)
Code Up
Code
Reference
Value
Reference
Value Up
Code Down
Reference Value Down
2¢(-17¡) is recommended 38¢(3¡) is recommended
KEY control method after converting to option mode
Key control in option mode
Energy Saver
Freezer/Power Freeze
Alarm/Lighting
Fridge/Power Cool
Code Down key
Code Up key
Reference Value down key
Reference Value Up key
Reference ValueCode
2¢(-17¡) is recommended 38¢(3¡) is recommended
Basically, option function has cleared data at shipping process.
Therefore, almost all setting value are "0".
Check the product information manual or specifications because setting value could be
changed particularly for the purpose of improving product at mass producing process.
NOTE