Filter
Top Products
55
TROUBLESHOOTING
2) After changing to the option mode, fresh food compartment "0" , freezer compartment "0" will be
displayed. ( Basically fresh food compartment "0", freezer "0" would be set at shipping process,
but setting value could be changed for the purpose of improving product at mass producing
process.)
- If fresh food compartment "0" shows only, temperature reference value of freezer compartment
will be set and current freezer compartment temperature code will be displayed on the freezer
temperature display.
3) If freezer compartment "4" is set as below freezer compartment code after fresh food
compartment "0 is set, standard temperature of freezer compartment will be lower than -4(-
2.0°C).
(Refer to the picture "changing the freezer compartment temperature")
: If you wait for 20 seconds after completing the setting, MICOM will save the setting value to
the EEPROM and normal display will be returned and the option setting mode will be
canceled.
4) Option changing method as above is the same as all RF267
**
/RF26V
**
model.
5) By the same method as above, it is possible to control the fresh food compartment temperature,
water supply, ice-maker harvest temperature/time, defrost return time, hysteresis by
temperature, notch gap by temperature etc.
6) Option function is set in the EEPROM at shipping process in the factory.
You would better not to change the option of your own.
Completing the setting is that option function return to normal display after 20 seconds.
Do not turn off the appliance before returning to the normal display mode.
Reference ValueCode
2¢(-17¡) is recommended 38¢(3¡) is recommended
Option setting function exists in the other items.
We will skip the explanation of the other functions by the option because it is associated with
refrigerator control function and is not needed at SERVICE.
(Please do not set the other options except above SERVICE Manual.)
NOTE