Filter
Top Products
Operating _23
02 OPERATING
CONTROLLING THE TEMPERATURE
This icon will light up when you press the button. The Energy Saver function is
automatically set to “ON” when power is supplied to the Refrigerator. If condensation occurs on the doors,
turn the Energy Saver mode off.
Lighting
This icon will light up when you press the button. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the
dispenser, turn the Lighting mode off.
Alarm
This icon will light up when you press the button. The door alarm will sound if any door is open for
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Fridge ice off
This icon will light up when you press the button. In this case, the fridge ice will not be produced.
This icon will light up when you press the button. In this case, the freezer ice will not be
produced.
Lock
This icon will light up when you press the button. In this case, you won’t be able to use the control
panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use
the control panel again.
• As this refrigerator has a dual Ice Maker, there is a possibility of using more energy. We
recommend if you have enough ice, set ice off to save energy.
• You may occasionally hear noises from Ice dropping or water owing to the icemaker. These
noises are part of normal operation.
The basic temperature and/or recommended temperatures of the Freezer and Refrigerator Compartments are -2°F
and 38°F respectively.
If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.
The Freezer temperature can be set between -8°F and 8°F to suit your
particular needs. Press the Freezer button repeatedly until the desired
temperature is shown in the temperature display. The temperature will
move 2°F degrees with each press (-2°F ➝ -4°F ➝ -6°F ➝ -8°F ➝ 8°F ➝
6°F ➝ 4°F ➝ 2°F ➝ 0°F ➝ -2°F). Keep in mind that foods like ice cream
may melt at 4°F. The temperature display will move sequentially from -8°F
to 8°F. Five seconds after the new temperature is set, the display will show
the actual current freezer temperature until the new temperature is reached.
If you need a lot of ice or if you want to cool down the freezer faster, you
can use the Power Freezer function. Press and hold the Freezer/Power
Cool button for 3 seconds. Then, the power freeze indicator will light and
activate the power freeze mode independent of the freezer set temperature.
If you select Power freeze, the inside temperature of the freezer will
decrease for about two and a half hours. When you have enough ice, just
press and hold the button for 3 seconds again to cancel the Power Freeze
mode. Then, the indicator will go out and the freezer will return to the set
temperature again.