Filter
Top Products
4
1. PRECAUTIONS(SAFETY WARNINGS)
Before servicing the refrigerator or replacing parts, unplug the unit from the
wall outlet.
Shock Hazard, observe basic safety rules.
Be sure to use the specified generic parts when servicing the product.
Confirm the Model Number on Product itself.
Inspect the mew part and assembly for Voltage, Current and temperature
specifications.
During the Diagnostic and Troubleshooting phase it is recommended to do a
visual inspection of all the connections of the wiring harness to the PCB ASSY.
Check the traces of water infiltration at the electric parts.
If there is a trace of water infiltration it is necessary for you to replace the
insulation tape or harness.
Check the assemble status of parts after troubleshooting.
It should be done indiscriminately as before the repair.
Check the use circumstance of refrigerator.
If the refrigerator is installed at the place that is damp or wet, or
status of installation is unstable, change the installation place.
Do earth in case of need.
Particularly, Be sure to earth when there is a risk of an electric
leakage by humidity or wetness.
Do not use multi plugs in a plug socket at the same time.
Check if the power cord and socket is damaged, pressed, squeezed,
or fired.
If the plug or plug socket is damaged, repair or exchange that
immediately.
Do not allow consumers to repair the appliance by themselves.
Do not store other materials except the foods.
Drugs or scientific materials : difficult to keep precise temperature.
The inflammables(alcohol, benzene, ether, LP gas, butane gas etc.):
have risk of explosion.