Filter
Top Products
24_ Operating
Operating your French Door Refigerator
(RFG237 MODEL)
CONTROLLING THE TEMPERATURE
Controlling the fridge temperature
The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the fridge
button repeatedly until the desired temperature is shown in the temperature display. The temperature
will move 2°F degrees each press(38°F → 36°F → 34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The
temperature control process for the fridge works just like the freezer process. Press the fridge button to
set your desired temperature. After a few seconds, the fridge will begin adjusting towards the newly set
temperature. This will be reflected in the digital display.
- The temperature of the Freezer, fridge or Pantry Room may rise
when you open the doors too frequently, or if a large amount of
warm or hot food is placed inside.
- This may cause the digital display to blink. Once the Freezer and
fridge temperature return to their normal set temperatures, the
blinking will stop.
- If the blinking continues, you may need to “reset” the Refrigerator.
Try unplugging the appliance, wait for around 10 minutes and then
plug the power cord back in.
- If there is an communication error between the Display and Main Controller, the Pantry Display light may blink.
Once the normal set temperatures are reached, the blinking will stop.
If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.
Using the Power Cool
For a quick Fridge cool down, use the Power Cool function.
Press and hold the Fridge/Hold 3 sec for Power Cool button for
3 seconds. Then, the power cool indicator will light and activate
the power cool mode independent of fridge set temperature.
If you select Power Cool, the inside temperature of the fridge
will decrease for about two and a half hours or until 25°F is
reached. Press and hold the button for 3 seconds again to cancel
the Power Cool mode. Then, the indicator will go out and the
Refrigerator will return to the set temperature again.
USING THE COLD WATER DISPENSER
Press the Ice / Water button to select the type of you want
NoICE
Select this if you
want to turn ice
maker off.