Filter
Top Products
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
Selectingthebestlocationfortherefrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled oor.
• A location with enough space for the refrigerator doors to open easily.
• Allow sufcient space to the right, left, back and top for air circulation.
If the Refrigerator does not have enough space, the internal cooling system
may not work properly.
• Please ensure that appliance can be moved freely in the event of
maintenance & service.
8_ Setting Up
Model
RFG238
**
/
RFG237
**
3 inch
3/4
2 inch
2 inch
First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung
French Door Refrigerator.
B
A
C
E
D
B
A
C
E
D
Depth
“A”
Width
“B”
Height
“C”
Overall
Height “D”
Depth
“E”
30 3/8”
(772mm)
35 7/8”
(912mm)
69 1/8”
(1755mm)
69 7/8”
(1775mm)
25 5/8”
(650mm)
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” (95mm) between the refrigerator
and wall to allow the door to swing open.
• Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature will go below 50ºF (10ºC).
• Do not locate the refrigerator where it may become wet.
CAUTION
When moving your refrigerator
To prevent floor damage be sure the front adjusting
legs are in the up position(above the floor).
Refer to ‘Adjusting the doors’ in the manual
(on page 15).
Control LeverFlat-blade screw driver(-)
FLOORING
For proper installation, this refrigerator must be placed on a leveled
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully loaded
refrigerator, or approximately 660lbs(299kg). To protect the finish of the
flooring, cut a large section of the cardboard carton and place under
the refrigerator where you are working. When moving a refrigerator, it is
needed to pull and push in the back-and-forth direction.