Filter
Top Products
01 SETTING UP
1. Locate the height-adjuster (
1
) in the freezer drawer.
Unscrew the 8 Phillips screws (
2
) slightly to loosen the door.
2. Loosen the controller screw (
3
) with a Phillips screwdriver (+).
After adjustment, tighten the controller screw (
3
) and then the philips screws.
3. Find the best level to align the door slope.
Freezer Drawer
Adjustment part
Example) The slope is about 0.08inch (2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
2
3
Slope
Reference
plane
1
ADJUSTING THE FREEZER DRAWER LEVEL
Setting up your French Door Refrigerator
Setting Up _17
DA68-01926A-10.indb 17 13. 4. 24. �� 11:38