Filter
Top Products
7. Lock Function
7-1After setting and 2 minutes passed, it entered the automatical lock status;
7-2 The lock indication shows that, upon button pressed, there were no pressing
sound or relative responses.
7-3 In lock status, press ock button in the control panel to unlock the setting."L "
7-4 In unlock status, press Lock button in the control panel to lock the setting.""
FIRST POWER SUPPLY & TEMPERATURE ADJUSTMENT
Upon power supplied, all indications read as 2 seconds. The "Standard "
displays as refrigerator setted to run automatically in the standard mode.
The temperature setting of refrigerator is 5 , where that of freezer
is -18 . The temperature of cooling and freeze cabinets shall display with
the music of activating running.
To set cabinet temperature. It is common to run in the standard mode,
and also adjustable based on the actual use requirements of users.
CONTROL PANEL INTRODUCTION
3-1.Inform authorized personal forrepair service in case of anyfollowing problems
happening;
3-2.When indication lamp flashing, it shows the refrigerator is in trouble.
1-1.Press down Cooling Power Key and set refrigeration temperature.
2-1.While refrigerator is running, keep pressing down On/Off Key 3 seconds and all
indication lamps light off. The refrigerator stops running.
2-2.In case of repressing down On/Off Key 3 seconds, the refrigerator recovers running.
CONTROL PANEL INTRODUCTION
1.Cooling Power Key
2.On/Off key
3.Failure Running Function
Disconnect the plug from power socket for any cleaning service.
9
8
1-2. If the Cooling Power Key is activated, the appliance will display the current setting
that may changed by repeat pressing actions. There are 5 temperature options you
may take. The temperature setting will change in cycle with key press. More are the
lamps on, the temperature is lower.
1-3. Some setting is confirmed and shown as the current temperature after a pause up to
5 seconds.
C C
NOTE
(RL33SB*)(RL33EA*,RL33EB*)
On/OffKey CoolingPower Key