![](http://pdfasset.owneriq.net/c/6b/c6b8b0e3-0f69-4510-9180-0bc8c0ebc2d3/c6b8b0e3-0f69-4510-9180-0bc8c0ebc2d3-bg2b.png)
Reattaching the Freezer Door
DISASSEMBLY AND REASSEMBLY
1) Reattach the hinge screws (
➀
). 2) Place the hole in the bottom of the door (
➂
) over
the hinge (➁).
3) Insert the upper hinge shaft (➃) into the hole (➄). After levelling between the hinge brackets (➅).
Reattach and close the latch (➆).
4) Connect the wires (
➇
) and the water tube
(➈).
5)
Put the front part of the upper hinge cover (➉)on
the front part of the upper hinge ( ) and reattach it
from the front part of the upper hinge cover first.
6)
Reattach the hinge screw ( ).
NOTE
12
11
Be sure to insert the water tube and push it to the end.
4242