Filter
Top Products
1. Safety Instructions on Service
Unplug the refrigerator before making any repair or any replacement.
Avoid the electric shock.
Use the rated components on the replacement.
Check the correct model number, rated voltage, rated current, operating temperature and so
on.
On repair, be sure that the wires such as harness are bundled tightly and are not exposed by
water
Bundle wires tightly in order not to be detached by the external force.
On repair, remove completely dust, particles or other things on housing parts, harness parts,
and connectors.
Cleaning may prevent fire by tracking or short.
Check if there is any trace indicating the infitration of water on electrical parts.
If there is kind of trace, change the related components or do the necessary action
such as taping using the insulating tape.
After repair, check the assembled state of parts.
It must be in the same assembled state when compared with the state before
disassembly.
Check the surrounding conditions of the installed refrigerator.
When the refrigerator is located at humid or wet place, or the installed state is
unstable, change the location.
If needed, do the ground.
Especially, if there is a possibility of the electric leakage, this appliance must be
properly grounded.
Do not allow consumers to use one outlet for several plugs.
Check whether the power cord is placed under other appliance and so, damaged, worm-out
squeezed.
Repair immediately the defective power plug or outlet.
Make sure that the power cord is not placed under other appliance or squeezed.
Do not allow consumers to keep bottles or the likes in the Freezer or to keep foods in unstable
position.
Do not allow consumers to repair the appliance by themselves.
Do not allow consumers to keep other chemicals except food.
Medicines and other materials for research ; This appliance will not maintain the precisely
constant temperature for them.
Volatile material(Alcohol, Benzene, Ether, LP gas etc.) : possibility of explosion
4