Samsung RS261MDWP Refrigerator User Manual


 
setting up _13
Removing the freezer door
A few things to mention first.
Make sure that you lift the door straight up so the hinges are not bent or broken.
Be careful not to pinch the water tubing and wire harness on the door.
Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and then
disconnect the wires
2
.
2. Remove hinge bolts
3
and a ground screw
4
counter-clockwise, and take o the upper hinge
5
in the direction of the arrow. Be careful when removing the door to ensure that it does not fall
on you.
3.
Remove the door from the lower hinge
6
by carefully lifting the door
7
.
4. Remove the lower hinge
8
from the lower hinge bracket
9
by lifting the lower hinge in the
direction of the arrow.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order.
01 SETTIN g UP
2
1
4
5
7
8
9
3
6
Is necesary two people for disassembling doors.
Be careful, no damage sensor harness with cover hinge.
Pressing
Before remove the bolts, disassembling Cover Leg front and hoses.