Filter
Top Products
18_ setting up
setting up your side-by-side refrigerator
INS TALLIN G T HE W ATER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
• 1/4” compression nut • plastic tubing
• copper tubing • ferrule
1. Tighten the compression nut
into the 1/4” compression fitting.
- If you are using copper tubing, slip the compression nut
(not included) and ferrule (not included)
on copper tubing (not included) as shown.
- If you are using plastic tubing
, insert the molded end(Bulb) of the plastic tubing into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing
.
2.
Tighten the compression nut into the compression fitting. Do not over-tighten the compression nut .
3. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to r
1/4” of the plastic tubing to make sure
you get a snug, leak-free connection.
CAUTION
Assembled)
Assembled)