26
CHECKING THE WATER DISPENSER LINE
1) For the ice maker to operate properly, water pressure of 20 ~125 psi is required.
In this range, a 170 cc (5.74 ounces) paper cup can be filled in 10 secs.
2) The water filter removes foreign particles. It does not sterilize or destroy any micro-organisms.
3) If the refrigerator is installed in an area with low water pressure (below 20psi), you should install a
booster pump to compensate.
4) Ensure the water storage tank inside the refrigerator is properly filled initially. Push the water dis-
penser lever until the water runs from the outlet.
NOTE
A Water line installation kit is available at extra cost from your dealer. The refrigerator
manufacturer recommends that you use a water supply kit containing copper tubing.
Checking the Parts
Water Filter
Clamp 12EA
Wrench
Tapping screw 12EA
Water pipe
Basic parts
Optional parts