Filter
Top Products
operating _25
Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about
every 6 months.
After removing the old water filter and installing a new one (see page 18 for instructions on how
to do this), reset the indicator status light by pressing the Ice Type button for about 3 seconds.
The indicator will light again in about 6 months to let you know it is time to change your water
filter.
When you do not use the water filter, press the Ice Type button for more than 5 seconds, the
Filter indicator lamp and the Filter Change letters will be off.
Child Lock
This icon will light up when you activate the Child Lock function by pressing the Vacation button
and the Fridge button simultaneously for 3 seconds. Press these two buttons for 3 seconds
again to reactivate.
Cubed Ice, Crushed Ice and turnning the Ice maker off.
Enjoy cubed or crushed ice by selecting your preference
from the digital control panel. If you don’t need ice, turn
the feature off to save on water and energy consumption.
The Ice type light indicates the type of ice(or no ice) that is
currently chosen.
CONTROLLING THE TEMPERATURE
Controlling the Freezer temperature
The freezer temperature can be set between -14°C (8°F) and -25ºC (-14°F) to suit your particular
needs. Press the Freezer button repeatedly until the desired temperature is shown in the
temperature display. Keep in mind that foods like ice cream may melt at -16ºC (4°F).
The temperature display will move sequentially from -14°C (8°F) and -25ºC (-14°F). When the
display reaches -14ºC (8°F), it will begin again at -25ºC (-14°F).
Five seconds after the new temperature is set the display will again show the actual current
freezer temperature. However, this number will change as the Freezer adjusts to the new
temperature.
Controlling the Fridge temperature
The refrigerator temperature can be set between 7ºC (46°F) and 1ºC (34°F) to suit your particular
needs. Press the Fridge button repeatedly until the desired temperature is shown in the
temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will
begin tracking towards the newly set temperature. This will be reflected in the digital display.
The temperature of the freezer or the refrigerator may rise from opening the doors too
frequently, or if a large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the freezer and refrigerator return to their
normal set temperatures the blinking will stop.
If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the
appliance, wait about 10 minutes and then plug back in.
02 OPERATING
Ice type