Filter
Top Products
Ice Off
This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced.
When ICE OFF blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.
Child Lock
This icon will light up when you activate the “Lock” feature. In this case, you won’t be able to use the
control panel. If you press and hold the Ice Off/Hold button for 3 seconds, you will be able to use the
control panel again.
Cooling Off Mode (“OF & OF” code on the display)
This function is for store display refrigerators. It is not for customer use.
In case of Cooling Off Mode, the refrigerator works but doesn’t make cool air. To cancel
this mode, press the Power Freeze and Freezer buttons at the same time for 3 seconds
until a “Ding-dong” sound is heard and the unit will now cool
CONTROLLING THE TEMPERATURE
Basic Temperature of Freezer and Fridge
The basic and recommended temperature of Freezer and Fridge compartments are -4ºF/38ºF.
If the temperature of Freezer and Fridge compartments are too high or low, adjust the temperature
manually.
Controlling the Freezer temperature
The freezer temperature can be set between 8ºF and -14ºF to suit your particular needs. Press the
Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in
mind that foods like ice cream may melt at 4ºF.
The temperature display will move sequentially from 8ºF and -14ºF. When the display reaches 8ºF, it
will begin again at -14ºF.
Five seconds after the new temperature is set the display will again show the actual current freezer
temperature. However, this number will change as the Freezer adjusts to the new temperature.
Controlling the Fridge temperature
The refrigerator temperature can be set between 46ºF and 34ºF to suit your particular needs. Press
the Fridge button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin
tracking towards the newly set temperature. This will be reflected in the digital display.
- The temperature of the freezer or the refrigerator may rise from opening the doors too
frequently, or if a large amount of warm or hot food is placed in either side.
- This may cause the digital display to blink. Once the freezer and refrigerator return to their
normal set temperatures the blinking will stop.
- If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the
appliance, wait about 10 minutes and then plug back in.
CAUTION
20_ operating
Cooling Off
mode
DA99-01746A(EN)-GGH-0.2.indd 20 2008.11.10 3:32:21 PM