Filter
Top Products
28_ Cooking instructions
AUTO SENSOR COOK
The Auto Sensor allows you to cook your food automatically by detecting the amount of humidity
generated from the food while cooking.
When cooking food, the humidity is generated. The Auto Sensor determines the proper time
and power level by detecting the humidity from the food, eliminating the need to set the
cooking time and power level.
When you cover a container with its lid or plastic wrap during Sensor Cooking, the Auto Sensor
will detect the humidity generated after the container has been saturated with steam.
Shortly before cooking ends, the remaining cooking time will begin its count down. This will be
a good time for you to rotate or stir the food for even cooking if it is necessary.
Before auto sensor cooking food may be seasoned with herbs, spices or browning sauces.
A word of caution though, salt or sugar may cause burn spots on food so these ingredients
should be added after cooking.
The MORE/LESS buttons is used to increase or decrease cooking time. You should use this
function to adjust the degree of cooking to suit your personal taste.
UTENSILS & COVER FOR SENSOR COOKING
To obtain good cooking results with this function, follow the directions for selecting appropriate
containers and covers in the charts in this book.
Always use microwave-safe containers and cover them with their lids or with plastic wrap.
When using plastic wrap, turn back one corner to allow steam to escape at the proper rate.
Always cover with the lid intended for the utensil being used. If the utensil does not have its
own lid, use plastic wrap.
Fill containers at least half full.
Foods that require stirring or rotating should be stirred or turned at the end of the Sensor Cook
cycle, when the time has started to count down on the display.
It is not advisable to use the Auto Sensor cooking feature on a continuous cooking
operation, i.e. one cooking operation immediately after another.
Install the oven in a well ventilated location for proper cooling and airflow and to ensure
the sensor will operate accurately.
To avoid poor results, do not use the Auto Sensor when the room ambient temperature
is too high or too low.
Avoid placing the oven near high moisture appliances, since this will interfere with the
proper performance of the Auto Sensor.
Always keep the inside of the oven clean. Wipe all spills with a damp cloth.
This oven is designed for household use only.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SMH8187STG_XAC-GB.indd 28 2008-04-07 오전 10:12:35