Filter
Top Products
11
The freezer contains an ice cube tray with a special device enabling
you to get the cubes out of the tray more easily.
Making Ice Cubes
1 Remove the ice cube tray by pulling it towards you.
`
2 Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3 Slide the tray back into the holder, taking care not to spill the
water.
4 Wait until the ice cubes are formed.
Freezing time
: It is recommended that you wait for about one
hour with the temperature set to HIGH for the ice
cubes to form.
Removing the Ice Cubes
1 Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
`
2 Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
Result
: The ice cubes fall into the storage bin.
3 Repeat Step 2 for the other half of the tray, if necessary.
4 Remove the storage bin by:
◆ Lifting it slightly
◆ Pulling it towards you
GB
Making Ice Cubes
TEMP CONTROL
HIGH
LOW
TEMP CONTROL
HIGH
LOW
SR-28/29/42/43/ENG 18-12-59 15:30 Page 11