Filter
Top Products
9
FREEZER COMPONENTS
1. Door: To open the door, grip the handle.
2. Handle: Always grip this handle to open and close the outer door.
3. Door gasket: This provides a tight door seal and prevents cold air leak. Keep clean.
4. Access port: This is used for leading the measuring cable from the freezing chamber to the outside.
5. Lock: Turn counterclockwise to 180
o
with a key and the outer door is securely locked.
6. Control panel: Temperature set key, buzzer key and alarm lamp etc. are installed on the panel.
Digital temperature display is also provided on it. See page 10 for the details.
7. Caster: 4 casters are provided to facilitate moving of the cabinet. At the time of installation, make
sure that the front 2 casters are not contact with the floor, by adjusting the leveling legs.
8. Leveling foot: 2 feet are provided on the front side (right and left). Keep the unit in level by
adjusting these legs at the installation.
9. Space for temperature recorder: An automatic temperature recorder (optional part) can be
attached here. See page 13 “Temperature recorder”.
10. Drain port: The water accumulated on the bottom of the chamber can be drained through this port.
11. Basket: Used for storing the materials in the chamber.
12. Remote alarm terminal (on back side): This is used to notice an alarm condition of the unit to
remote location. Refer to page 15 “Remote alarm terminal”.
13. Battery switch: This is a switch for power failure. Always set the switch in ON position. Be sure
to turn off this switch to save the battery if the freezer is not in operating for the long period (more than 1
month).
14. Power switch: This is for turning ON/OFF the power to the unit. ON – “I” OFF – “ ”. This has
a function as an over-current protection breaker (15A).