Filter
Top Products
- 62 -
24
ROUTINE MAINTENANCE
Replacement of fluorescent lamp
The fluorescent lamp is placed vertically at the center of
the chamber. Follow the procedure below to replace
the lamp.
1. Turn off the fluorescent light switch and disconnect
the power supply plug.
2. Remove all shelves or drawers.
3. In the case of MPR-1411R, remove the rail that is
placed vertically at the center of the frame.
4. Pull the lamp toward the rear together with the cover
as shown in Fig. 1, together with the wiring.
5. Take out the lamp and remove the connector
water-proof rubber at both ends. As shown in Fig. 2,
shift the rubber by rolling it.
6. Remove the connector as shown in Fig. 3.
7. Take out the lamp by pulling it gently from the cover.
8. After replacing a new lamp, return the lamp with
cover to the original position.
Socke
t
Fig.
Connector
water-
Lamp
Lamp
Cove
Fig.
Fig.