Final Check List:
1. Is the unit located indoors in a controlled
environment?
2. Is the unit located where it can receive
adequate cooling air?
3. Has the correct electrical power been supplied
to the machine?
4. Have all the water supply connections been
made?
5. Have all the drain connections been made?
6. Has the remote condenser been properly
installed?
7. Has the interconnecting tubing been properly
routed between the remote condenser and the
ice machine?
8. Have the quick connects been properly
connected?
9. Has the power supply wire from the ice
machine to the remote condenser been
properly run and connected?
10. Has the unit been leveled?
11. Have all unpacking materials been removed?
12. Is the water pressure adequate?
13. Have the drain connections been checked for
leaks?
14. Has the bin interior been wiped clean or
sanitized?
15. Have any water filter cartridges been replaced?
16. Have all required kits and adapters been
properly installed?
July 2006
Page 15
C0522 through C1030
Remote Condenser Models - User Manual