Sears 72671 Range User Manual


 
How to Set the Oven for Cleaning
Quick Reminder:
1. latch the door.
2. Turn the OVEN SET knob to CLEAN.
If the oven is too hot and you start to set a clean cycle,
you wilt not be able to slide the latch°
Allow additional time for cooling before you try to set
the cycler
1. Follow directions to prepare the oven for cleaning_
2. Slide the latch handle to the
right as far as it will go.
Never force the latch
handle. Forcing the handle I|ll_
will damage the door lock
mechanism.
3. Turn the OVEN SET knob to CLEAN. The SELF
CLEAN DOOR LATCH, AUTOMATIC OVEN,
OVEN ON and COOK TIME ON/OFF lights
will glow_
NOTE: If you turn the OVEN SET knob before
you slide the latch, the SELF CLEAN DOOR
LATCH light will flash_ Slide the latch to the right°
Clean cycle time is normally 4 hours and
20 minutes. On some models you can change the
Clean Time to anywhere between 3 hours and 5 hours,
and 59 minutes, depending on how dirty your oven is.
You have one minute to change your Clean Time.
Use the HOUR and MIN. pads to change the total
Clean Time.
Both the OVEN ON light and the SELF CLEAN
DOOR LATCH light wilt flash when the Clean Time
is finished.
After using the dean cycle, the door latch and the
OVEN SET knob must be returned to their original
positions before you can use the oven.
When the SELF CLEAN DOOR LATCH light
flashes, slide the latch handle to the left as far as it
will go, turn the OVEN SET knob to OFF and open
the door.
Never force the latch handle. Wait until the SELF
CLEAN DOOR LATCH light flashes and the latch
slides easily. Forcing the latch handle may damage the
door lock.
To Stop A Clean Cycle
1. Turn the OVEN SET knob to OFE
2. Wait until the oven has cooled below the locking
temperature to unlatch the door° You will not be
able to open the door right away unless the oven has
cooled below the locking temperature.
After a Clean Cycle
You may notice some white ash in the oven. Just
wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-t_flled
steel wool pad. Be sure to rinse thoroughly with a
vinegar and water mixture. These deposits are usually a
salt residue that cannot be removed by the clean cycle,.
If the oven is not dean after one clean cycle,
repeat the cycle.
NOTE:
You cannot set the oven for cooking until the oven is
coo! enough for the door to be unlatched°
While the oven is self-cleaning, you can press the
CLOCK pad to display the time of day. To return
to the clean count down, press the COOK TIME
ON/OFF pad_
(c_ntinued next page)
25