Filter
Top Products
Setting up your French Door Refrigerator
10_ Setting Up
3. Remove the 3 hex head bolts (
7
) attached
to the upper left and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver, remove the
ground screw (
8
) attached to the upper left and
right door hinges.
Remove the upper left and right door hinges (
9
).
4. Lift the door straight up to remove.
5. With a Philips head screwdriver, remove the two
screws (
10
) attached to the lower left and right
door hinges.
With an Wrench(10mm), remove the two hex
head bolts (
11
) attached to the lower left and
right door hinges.
Remove the lower left and right door hinges (
11
).
9
7
8
12
10
11
4. Remove four 10mm hex-head bolts from both sides.
5. Lift the freezer door up from the rails.
2. Remove the tilting pocket(
1
) by pulling on both brackets(
2
)
upward at the same time.
3. Take out the lower basket(
3
) by lifting the basket up from
rail system.
1. Push the upper drawer until it reaches to the cabinet rear wall.
DISASSEMBLE THE FREEZER DRAWER
1
2
3
Slot
Slot