Filter
Top Products
Setting Up _13
01 SETTING UP
5. Position the Top Table (
2
) in place.
With a Philips head screwdriver, insert and tighten the
3 screws into the Top Table. With the door opened,
reinsert the Top Table cap (
1
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
3
4
5
6
1
2
REATTACHING THE REFRIGERATOR DOORS
4. Reconnect the 3 electrical connector (
3
) found above
the upper left door hinge. Reconnect the electrical
connector (
4
) found above the upper right door hinge.
Reattatch the water tube (
5
) by pushing the tube
fitting (
6
) as shown in the picture.