12
“PILOT” display
The “PILOT” display ቧ appears on the display panel when the
pilot tone evaluation is activated (
see “Activating/deactivating
the pilot tone evaluation – PILOT” on page 29).
RF signal indication
The level display for RF signal “RF” shows the strength of the
received RF signal. In addition, the green LED (RF)
¿ at the
front of the receiver lights up when an RF signal is being
received.
However, the green LED (RF) does not light up when the audio
output is muted because
y the RF signal of the received transmitter is too weak,
y the transmitter is set to mono operation and the receiver’s
pilot tone evaluation is deactivated.
Display backlighting
After pressing a button, the display remains backlit for approx.
10 seconds.
ቧ
¿