29
̈ Press the SET button to change to the next segment and
select the next character.
̈ Have you entered the name completely? Press the SET
button to store your setting and to return to the previous
menu level.
Loading the factory-preset default settings –
RESET
Via the “RESET” menu, you can load the factory-preset default
settings. Only the selected setting for the pilot tone remains
unchanged. After the reset, the receiver is restarted and the
standard display is shown on the display panel.
Activating/deactivating the pilot tone
evaluation – PILOT
Via the “PILOT” menu, you can activate or deactivate the pilot
tone evaluation.
The pilot tone has two functions:
y Stereo identification
y Squelch control
When used with a suitable transmitter which adds a pilot tone
to the transmitted stereo signal, the receiver can evaluate this
pilot tone. When the transmitter is set to mono operation, you
have to deactivate the pilot tone evaluation on the receiver.
Activating/deactivating the lock mode – LOCK
Via the “LOCK” menu, you can activate or deactivate the lock
mode.
The lock mode prevents that the receiver is accidentally
programmed during operation. However, the volume can be
adjusted at any time.