Filter
Top Products
27
A40509,R-8000G O/M
OTHER CONVENIENT FEATURES
5. MEMORY CHECK
You can check the information programmed into the
memory.
PROCEDURE
1
Touch CUSTOM HELP
pad 6 times.
3
Touch number pad.
2
Touch SET pad.
x 6
Checking time and cooking mode
* Suppose you want to know the information
programmed into the memory 3, programmed for 15
minutes at High Speed Grill with Micro 30 % power.
DISPLAY
MEMORY
CHECK
PRESS SET
SELECT
NUMBER PAD
OR
DOUBLE
TRIPLE PAD
NO. 3
15.00
HIGH GRILL
30P
After 1 sec.
NOTE:
1. You can continue to check the program in other
memories by pressing the desired number after step 3.
2. To complete memory check, press STOP/CLEAR
pad after step 3.
HEAT MICRO
Checking multiplier factor
* Suppose you want to know the multiplier factors
for double and triple quantity in memory 3.
PROCEDURE
1
Touch CUSTOM HELP
pad 6 times.
2
Touch SET pad.
x 6
DISPLAY
MEMORY
CHECK
PRESS SET
SELECT
NUMBER PAD
OR
DOUBLE
TRIPLE PAD
3
SELECT
NUMBER PAD
4
Touch number pad.
NO. 3
NO. 3
1.60 X2
2.00 X3
Touch DOUBLE/TRIPLE
QTY pad.
6.DEMONSTRATION MODE
To demonstrate, touch CUSTOM HELP 7 times, SET
and then touch START and hold for 3 seconds.
“ DEMO MODE ON ”
will appear in the display.
Cooking operations and specific special features can
now be demonstrated with no power in the oven.
For example, touch MINUTE PLUS and the display
will show “ 1.00 ”and count down quickly to “ END ”.
To cancel, touch CUSTOM HELP 7 times, SET and then
touch STOP/CLEAR. “ DEMO MODE OFF ” will
appear in the display. If easier, unplug the oven from
the electrical outlet and replug.
After 1 second, the display will
show multiplier factors.
NOTE:
1.
You can continue to check the program in other
memories by pressing the desired number after step 3.
2. The multiplier for Automatic Cooking and Express
Defrost cannot be checked. If you select any memory
bank that has stored memory for any automatic
cooking or Express Defrost program, ”NOT
AVAILABLE” will appear in the display.
3. To complete memory check, press STOP/CLEAR
pad after step 3.
R-8000G P.25- 03.9.24, 11:22 AM27