Filter
Top Products
8
UNPACKING AND INSTALLATION INSTRUCTIONS
• Phillips Screwdriver
• Electric Drill
• 1/2”, 5/8” and 3/32” Drill Bits
• 1-1/2” Wood Bit or Metal Hole Cutter
(if metal cabinet is used)
• Saw to cut exhaust opening
(if needed)
• Protective Drop Cloth for product and
range - you may also use carton for
protection
• Scissors
• Pencil
• Measure
• Tape
Figure 4
Parts shown not to common scale.
ITEM NAME QUANTITY PART CODE
1 Wood Screw 5 X 30 mm 6 XTSSD50P35000
2 Toggle Bolt with nuts #10 - 24 X 50 mm 4 LX-BZ0195WRE0
3 Top Cabinet Screw 5 X 60 mm 2 XBRSD50P60000
4 Power Cord Hanger 1 LX-MZB001MRE0
5 Tapping Screw 4 x 12 mm 3 XOTSD40P12000
6 Flat Washer 30 mm diameter 2 XWHSD50-16300
7 Grommet 1 LBSHC0040MRE0
8 Rear Cushion 1 PCUSUB059MRP0
9 Exhaust Damper Assembly 1 FFTA-B005MRK0
! Scale Plate 2 LANG-B002MRP0
" Grease Filter 2 PFIL-B002MRE0
The INSTALLATION HARDWARE items 1 - 7 are in a small bag. Items 8 - " are packed separately. All items
are in a small carton packed below the oven.
5 TOOLS RECOMMENDED FOR INSTALLATION
6 INSTALLATION HARDWARE
R-1510/11/14#316 4/29/02, 11:57 AM8