11
SSMS 600 B2
GB
IE
Wall mounting
2 plugs and 2 screws are supplied to enable the wall bracket w to be mounted.
WARNING RISK OF ELECTRIC SHOCK!
Before mounting the wall bracket ► w check whether there ar
e any power
cables or pipes in the wall!
Mark the positions for the drill holes using the wall bracket 1) w.
Bore the holes with a 6 mm drill.2)
Insert the dowels into the drill holes.3)
Position both the openings of the wall-holder 4) w over the drill holes and then
fi x it tightly using both screws.
Cleaning
WARNING RISK OF ELECTRIC SHOCK!
Before you start to clean the hand blender, ALWAYS unplug the appliance ►
from the mains power socket.
► Under no circumstances may the motor unit 4 be cleaned by immersing
it in water or holding it under running water.
WARNING - RISK OF PHYSICAL INJURY!
To avoid injuries, exercise caution when handling the extremely sharp ►
blade 7. Reassemble the liquidiser after use and cleaning to prevent injury
fr
om the exposed blade. Keep the blade out of the reach of children.
WARNING - PROPERTY DAMAGE!
DO NOT clean the accessories of your hand blender in the dishwasher as ►
it may cause damage to them.
Do not use aggressiv
e, chemical or abrasive cleaning agents! They could ►
irreparably damage the upper surfaces!