Silvercrest SEM 1100 A1 Coffeemaker User Manual


 
18
Espresso Machine
GB
IE
Troubleshooting
Problem Cause Remedy
The espresso no
longer fl ows out
• The espresso powder is too
moist and/or compressed
too tight.
• Reprepare the espresso, however,
this time do not compress it so
tightly, or exchange it completely.
No water in the water tank 1.• Fill the water tank 1 with water.
• The holes in the sieve carrier
openings are blocked.
Clean the sieve carrier w.
the espresso drips over
the edges of the sieve
carrier w instead of
from the openings.
The sieve carrier w is not
correctly inserted.
Correctly insert the sieve carrier
w.
• The sieve carrier openings
are blocked.
Clean the sieve carrier w.
There are espresso powder
residues on the edges of the
sieve carrier w.
Clean the espresso powder
residues from the edges of
the sieve carrier w.
The espresso is cold.
• The appliance was not
preheated.
• Preheat the appliance.
The green heating-up control
lamp 4 has not yet glowed.
Wait until the green heating-up
control lamp 4 glows.
• The cups were not prewarmed. Prewarm the cups.
Noisy operation
of the pump.
The water tank 1 is empty. Fill the water tank 1 with water.
The water tank 1 is not properly
inserted, meaning that water
cannot enter into the appliance.
Correctly insert the water tank 1.