Filter
Top Products
- 5 -
Note:
In standby mode, that is, after switching off or befo-
re switching on, indicated in the display 2 are eit-
her "- L" or "- H -".
These heat indicators mean:
"- L -" = "Low" - the hob temperature is < 50°C
or
"- H -" = "High" - the hob temperature is > 50°C
For safety reasons, the cookware recognition feature
switches the appliance off automatically when you ...
• remove the cooking vessel from the hob for longer
than 15 seconds, or do not place one there.
• Although the energy field is immediately switched
off with short cookware removals, the selected
function remains active. Around every 3 seconds
a signal tone issues a reminder that in roughly
15 seconds the appliance will switch itself off
automatically.
The hob 1 also switches itself off after 120 minutes
of continuous use should you not have entered in
any new settings in the meantime.
d) Heating up
After you have switched the appliance on ...
• Press the button Power level 6, to adust the power
level in steps (L1 - L10). The higher the power level,
the higher the temperature generated in the coo-
king vessel. Using the button ▼ ▲ 5 you can
adjust this from L1 (lowest power level) through
to L10 (highest power level). The control lamp
Power Stage 3 glows during the adjustment.
Note:
Warming up starts as soon as one of these buttons
is activated. The setting can be adjusted at any time
during the current usage.
e) Elapsed time (Timer)
You can pre-select a time period from 1...180 minutes,
after which the hob 1 should switch itself off.
• First start the warming-up, as described above.
• Press the button Timer 7 to start the stopwatch
function. Serving as a check, a "0" appears in
the display 2 and the control lamp Timer 4
glows.
• With the button ▼ ▲ 5 you can now set the
desired elapse time period from 1...180 minutes ...
- forwards in 5 minute steps,
- backwards in 1 minute steps.
• When you have set the desired time period and
do not press any other buttons, the countdown
starts automatically and the programmed power
level appears in the display 2.
Cleaning and Care
Apart from regular cleaning after use, no maintenance
work of any kind is required on the appliance.
CAUTION!
Before cleaning the appliance:
• First remove the plug 0 from the power socket.
Risk of electric shock! Allow the appliance to
cool down. Risk of Burns!
UNDER NO CIRCUMSTANCES may the ap-
pliance or parts of it be submersed in liquids!
This could result in you receiving a fatal electric
shock and the appliance could be irreparably
damaged.
• Never open the housing of the appliance. You
could receive a potentially fatal electric shock.
• Do not use solvents or abrasive cleaners. These
could damage the hob 1 and the areas made
of synthetic materials.
• Clean all outer surfaces and the power cable 0
only with a lightly moistened cloth. In all cases,
dry the appliance well.
IB_54336_SIKP2000A1_LB3 23.06.2010 14:06 Uhr Seite 5