Filter
Top Products
- 20 -
Select a start time
With this programme you can preset a specific start
time for the cooking or grilling of the foodstuff. If the
programming is carried out correctly, the appliance
starts automatically at the programmed time.
Take note: The clock must be correctly set to be
able to select the function "Selecting the start
time"..
1. Enter the desired cooking program:
• For microwave operation: Press the button
Operation r the appropriate number of
times to set the required power level. Programme
the cooking time with the control dial 0.
• For grilling: Press the button Grill 7 until
the desired grill function is activated. Set the re-
quired cooking time with the control dial 0.
• For convection operation: Press the button Con-
vection 9 the appropriate number of times
to set the required temperature. Programme the
cooking time with the control dial 0.
• For the combination process "Convection":
Press the combination button Microwave –
Convention 6 the appropriate num-
ber of times to set the required temperature.
Programme the cooking time with the control
dial 0.
• For the combination process "Grill":
Press the combination button Microwave –
Grill e the appropriate number of ti-
mes to set the grilling process. Programme the
cooking time with the control dial 0.
• For an automatic menu: Select the desired auto-
matic menu using the control dial 0. Repeatedly
press the button Weight/Kitchen Timer w
until the desired weight appears in the
display 1.
2. Press the button Clock/Timer 8 . The
display 1 shows the currently set time and the
hour digit flashes.
3. Turn the control dial 0 to programme in the
hours.
4. Press the button Clock/Timer 8 , now
the minute figure flashes.
5. Turn the control dial 0 to programme in the
minutes.
6. Press the button Start/Quickstart 0 0 .
The hourglass appears in the display 1.
The microwave oven automatically starts the
cooking process at the programmed time.
Take note:
To query the saved start time, press the button
Clock/Timer 8 .
The saved start time will be shown in the display 1.
To delete the saved start time and thus cancel the
programmed procedure, press the button Clock/
Timer 8 so that the set start time appears
in the display 1. Then, while the start time is to be
seen in the display 1, press the button Stop/Child
safety q. The hourglass in the display 1
extinguishes. The saved procedure is deleted.
IB_SMW900EDSA1_49386_LB3C 30.07.2010 16:54 Uhr Seite 20