Filter
Top Products
142468
Before the fi rst use of the appliance fi rst plug the
power cable into the wall socket. Display indicates
dashes for both the refrigerator and the freezer.
•
Switch the appliance on/off by pressing the
button A for 3 seconds. Both the refrigerator and
the freezer are started, green signal lamps B
and D are on. In this mode you can switch off
the refrigerator only by pressing button C for 3
seconds (green signal lamp 2 is off).
•
Display indicates temperature in the refrigerator
+9°C and in the freezer 0°C. These values remain
on the display until the actual temperature within
the respective space falls below these values.
•
The appliance has been preset in the factory to
the recommended temperatures of the refrigerator
to +5°C and freezer to -18°C.
Temperature setting range of the refrigerator:
+1°C do +9°.
Temperature setting range of the freezer:
-16°C do -24°C.
•
Freezer temperature is set by pressing button K,
and refrigerator temperature by pressing button
M.
•
After pressing the temperature setting button
the display starts fl ashing and indicates the last
selected setting.
•
Temperature setting is changed by short
consecutive pressing of the button in 1°C steps.
During the setting procedure all other buttons are
idle.
•
Approximately 5 seconds after the setting button
is released the display indicates the actual
temperature.
18
Temperature setting
Switching the
appliance ON/OFF