Filter
Top Products
Instructions for the user
8.4 Door glass (on some models only)
The door glass should always be kept clean.
For easier cleaning, the glass parts of the door can be fully removed by
proceeding as described below.
After opening the door and locking it in place with at least one of the
hinges (see point “8.3 Removing door”), remove the two panes of glass.
The first pane is removed in two steps: first slide it along, leaving it
resting on the door frame (1) and then lift it out (2).The second pane
must first be removed from the seat “A” (see detail) by slighting it out a
few centimetres. Then also free it from the seat “B”.
If the door should close during these operations, simply relock one of
the hinges as described in point "8.3 Removing door".
The panes of glass can now be washed separately.
Use absorbent kitchen paper to clean. In case of tough spots, clean with
a damp sponge using regular detergent. This oven door is air cooled.
Care should be taken not to use excess moisture for cleaning, and avoid
spillage through the vents.
Warning: before removing the panes of glass, make sure that the door
has been locked in open position as described in point “8.3 Removing
door”. This operation might have to be repeated during the removal
process if the door is accidentally freed.
59