Smeg A42C Oven User Manual


 
Instructions for the installer
33
The appliance is fitted with a terminal board at the rear for electrical
connections (see following diagram). To access, remove the rear cover.
For operation on 400-415V3N
: use an
H05RR-F-type five-core cable (5 x 2.5 mm
2
).
For operation on 400-415V2N
: use an
H05RR-F-type four-core cable (4 x 4 mm
2
).
For operation on 230-240V
: use an
H05RR-F-type three-core cable (3 x 6 mm
2
).
The cable end to be connected to the
appliance must be provided with an ground
wire (yellow-green) at least 20 mm longer.