Filter
Top Products
Instructions for the installer
Complete wiring up to power supply with an appropriately rated five-core
plug (see data plate) or, in case of operation from a 220-240V∼ power
supply, with a three-core plug. Make sure that plug and wall socket are of
the same type and are in conformity with regulations in force. Make sure
that the appliance is properly earthed. Before powering, check that the
power line is properly earthed. Avoid using adapters or shunters.
The manufacturer declines all responsibility for damage to persons
or things caused by non-observance of the above prescriptions or by
interference with any part of the appliance.
2.2 Positioning and levelling of the appliance
Having carried out the electricity hook-up, level the appliance using the
four adjustable legs.
2.3 Instruction for wall fixing (only on some models)
1) Fix the screw to the wall and hook the chain (B);
2) Hook the chain to the hole positioned at the rear of the cooker by
the gas pipe (A);
3) Once the chain is in position, push the cooker against the wall;
4) The height of the screw hole from floor level must not exceed 800
mm (C).
A
B
C
35