Smeg ADP8252 Dishwasher User Manual


 
The First Wash
Switching on
9
The dishwasher must not be turned on until the dishes have been loaded, the dispenser has
been filled with detergent, a check has been made that the spray arms turn freely, and the door
has been shut. The water tap must also be turned on and salt placed in the container.
To simplify programming and communication, the dishwasher is equipped with an "Information
Display" (see diagram page 10).
Start-up
At this point, to start the dishwasher simply close the door. A double beep will inform you that
the programme is starting.
Switch-off
The end of the washing programme is signalled by an on/off beeper and the appearance of
"P0" on the display.
Setting the programme "P"
All programming operations are accompanied by a short beep to indicate reception; if you do
not hear anything when a button is pressed, the programme selected does not provide this
function. To select the most suitable programme for the dishes to be washed, comply carefully
with the table in the manual which follows, especially in the beginning. This table lists the
programmes available in relation to the type of dishes, their strength and resistance to
temperature, and how dirty they are. With this fully integrated dishwasher, the washing
programmes are selected with the door partly open. Once the most suitable programme has
been identified, it is set by pressing the "programme selection" ("P") button until the
corresponding number appears on the information display.
N.B.: "P0" on the display means that no washing programme has been selected. This
indication remains on the display until the programme selection button is pressed, at this point
the display will show the last programme carried out. Each time the button is pressed, the
system will scroll through the programme numbers from that number onward.
6
7
8
9
10
Indicates the programme selected/delayed start/alarms.
Indicates that a delay has been set before the start of the programme.
No rinse aid warning light.
No regenerating salt warning light.
Indicates that an economy programme has been selected.