Smeg ALFA141VE Oven User Manual


 
30
Instructions for the User
4.5 Editing / saving a program
The oven has 38 programs that can be modified by the user (from P01 to
P38). To set the operational parameters of a program:
Turn the knob to the or symbols to select the program you wish
to save / edit.
Keep the “PUSH” knob pressed for 3 seconds: the display will show
the cooking temperature.
Turn the knob to the or symbols to set the cooking temperature.
• Press the PUSH” knob: the display will show the cooking time.
Turn the knob to the or symbols to set the cooking time (from 1
to 99 min).
Only on the steam model,
press the “PUSH” knob; the display will
show the “H00” humidification cycle. Turn the knob to the or
symbols to set the humidification from “H00” to “H10”.
Press the “PUSH” knob to exit from the data setting and saving phase.
The message “PEnd” will appear on the display and the parameters
will be saved.
After 3 seconds the display will show the parameters set in rotation.
To return to the “OFF” condition keep the “STOP” button pressed for 4
seconds.